Planning a hurricane shutters project in Biloxi? This comprehensive homeowner checklist covers everything you need to know before, during, and after your project. Print it out, check off each item as you go, and use it to stay organized throughout the process. A well-planned project is a successful project — and this checklist helps you avoid the most common mistakes Biloxi homeowners make when undertaking hurricane shutters work.

Whether you are comparing contractor quotes, preparing your property, or managing the work in progress, these steps will guide you through every phase. We have compiled this checklist based on feedback from hundreds of Biloxi homeowners and input from our network of pre-vetted hurricane shutters professionals. Each item represents a real lesson learned from actual projects in the Biloxi area.

Complete Hurricane Shutter Checklist

Be ready before the storm. Follow this checklist to protect your home.

Before Hurricane Season (May)

• Inspect all shutters for rust, corrosion, or damage
• Test accordion shutters — lubricate tracks if sticky
• Verify all hardware and fasteners are present
• Check fabric/storm panel condition — replace if torn or bent
• Test electric roll-down shutters — verify manual override works
• Photograph each window opening with shutters installed for insurance

When a Storm Watch Is Issued (48+ Hours Out)

• Install panels BEFORE winds pick up (panels are dangerous in wind)
• Label each panel — they may be sized per window
• Use proper anchors and wing nuts — not substitute hardware
• Install in correct order: ground floor first, then upper floors
• Secure all outdoor furniture, grills, decorations
• Fill vehicles with gas — stations may close

During the Storm

• Stay indoors — do NOT go outside to adjust shutters
• Stay away from windows even with shutters installed
• Monitor local emergency channels for updates
• Keep flashlights and battery radio accessible

After the Storm

• Inspect shutters for storm damage before removal
• Clean and dry shutters before storage
• Report any damage to insurance with photos
• Schedule professional inspection if panels are bent or hardware damaged